OEM 2007 Dodge Magnum Tie Rod End

Steering Rod End
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

  • 2007 Dodge Magnum Tie Rod End - 5142938AC
    2007 Dodge Magnum Tie Rod End Diagram - 5142938AC
    View related parts

    2007 Dodge Magnum Tie Rod End, Outer Passenger Side Part Number: 5142938AC

    $63.79 MSRP: $140.00
    You Save: $76.21 (55%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Steering Tie Rod End; Outer Tie Rod End; Outer Tie Rod
    • Position: Outer Passenger Side
    • Replaces: 5142938AB, 5142938AA
    • Item Weight: 2.90 Pounds
    • Item Dimensions: 2.3 x 4.2 x 9.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5142938AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Magnum Submodels:
    • R/T, SE, SXT, SXT Special Edition | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
  • 2007 Dodge Magnum Tie Rod End - 5142939AC
    2007 Dodge Magnum Tie Rod End Diagram - 5142939AC
    View related parts

    2007 Dodge Magnum Tie Rod End, Outer Driver Side Part Number: 5142939AC

    $53.88 MSRP: $118.00
    You Save: $64.12 (55%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Steering Tie Rod End; Outer Tie Rod End; Outer Tie Rod
    • Position: Outer Driver Side
    • Replaces: 5142939AA, 5142939AB
    • Item Weight: 3.20 Pounds
    • Item Dimensions: 9.5 x 4.3 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5142939AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Magnum Submodels:
    • R/T, SE, SRT8, SXT, SXT Special Edition | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2007 Dodge Magnum Tie Rod End Parts and Q&A

  • Q: How to Service and Repair a Tie Rod End on a Rear-Wheel-Drive for Outer on 2007 Dodge Magnum?
    A: Before you can service the outer tie rod on a rear-wheel-drive car, support it on a jack stand and take off the three wheel mounting nuts and front wheel assembly. As you loosen the nut on the jam sleeve and turn the inner tie rod, be careful not to rotate the bellows; remove the clamp and make sure the bellows can move before you continue. Then, use a tie rod ratchet to gently move the nut on the outer tie rod in the opposite direction to the screw. After removing the nut from the outer tie rod, use Remover, Special Tool 9360, to separate the outer tie rod end from the knuckle. After that, loosen the outer tie rod off the inner tie rod, noting how many times it turns which will guide your toe adjustment and help when assembling the rod back.

Related 2007 Dodge Magnum Parts