How to Service and Repair a Tie Rod End on a Rear-Wheel-Drive on 2008 Dodge Magnum?

Service the rear-wheel-drive car's outer tie rod by keeping an eye on the inner tie rod when rotating; make sure the bellows doesn't get twisted, remove the clamp from the inner tie rod and check that it is able to move freely. Put the outer tie rod through the inner tie rod and make sure to install it the same amount of turns you took it off. After that, attach the outer tie rod end (5) onto the steering knuckle (2) and tighten the nut (1) to 85 Nm (63 ft. lbs.). Then, place the tire and wheel assembly onto each wheel hub and torque the nuts at 150 Nm (110 ft. lbs.) for regular vehicles or 190 Nm (140 ft. lbs.) for police cars. Hold the car down and adjust the wheels to achieve toe specifications. Apply a tightening force of 75 Nm (55 ft. lbs.) to the tie rod jam nut (3).

OEM 2008 Dodge Magnum Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

View related parts
2008 Dodge Magnum Tie Rod End, Outer Passenger Side Part Number: 5142938AC
$63.79 MSRP: $140.00
You Save: $76.21 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Steering Tie Rod End; Outer Tie Rod End; Outer Tie Rod
- Position: Outer Passenger Side
- Replaces: 5142938AB, 5142938AA
- Item Weight: 2.90 Pounds
- Item Dimensions: 2.3 x 4.2 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142938AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SXT, SXT Special Edition | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Magnum Tie Rod End, Outer Driver Side Part Number: 5142939AC
$53.88 MSRP: $118.00
You Save: $64.12 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Steering Tie Rod End; Outer Tie Rod End; Outer Tie Rod
- Position: Outer Driver Side
- Replaces: 5142939AA, 5142939AB
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.5 x 4.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142939AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT, SXT Special Edition | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Tie Rod End Parts and Q&A

Q: How to Service and Repair a Tie Rod End on a Rear-Wheel-Drive on 2008 Dodge Magnum?
A: Service the rear-wheel-drive car's outer tie rod by keeping an eye on the inner tie rod when rotating; make sure the bellows doesn't get twisted, remove the clamp from the inner tie rod and check that it is able to move freely. Put the outer tie rod through the inner tie rod and make sure to install it the same amount of turns you took it off. After that, attach the outer tie rod end (5) onto the steering knuckle (2) and tighten the nut (1) to 85 Nm (63 ft. lbs.). Then, place the tire and wheel assembly onto each wheel hub and torque the nuts at 150 Nm (110 ft. lbs.) for regular vehicles or 190 Nm (140 ft. lbs.) for police cars. Hold the car down and adjust the wheels to achieve toe specifications. Apply a tightening force of 75 Nm (55 ft. lbs.) to the tie rod jam nut (3).