How to Remove the ABS Control Module from the Hydraulic Control Assembly on 2007 Dodge Nitro?

The first step to replacing the Hydraulic Control Assembly is to set up a prop rod on the brake pedal to keep the brake system pressurized. After that, disconnect the negative battery cable from the battery. After that, tug on the ABM harness connector to remove it. Afterwards, take out the brake lines from the ABM. Remove the final piece by pulling the ABM unit out of the bracket.

OEM 2007 Dodge Nitro ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2007 Dodge Nitro Modulator Valve Part Number: 5179771AA
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Unit; Modulator; Control Unit Anti-Lock Brake
- Item Weight: 5.00 Pounds
- Item Dimensions: 7.0 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179771AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Control Module Part Number: 68002458AE
Product Specifications
- Other Name: Module - ABS; ABS Control Module
- Replaces: 68002458AD, 68002458AB, 68002458AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.5 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002458AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro ABS Control Module Parts and Q&A

Q: How to Remove the ABS Control Module from the Hydraulic Control Assembly on 2007 Dodge Nitro?
A: The first step to replacing the Hydraulic Control Assembly is to set up a prop rod on the brake pedal to keep the brake system pressurized. After that, disconnect the negative battery cable from the battery. After that, tug on the ABM harness connector to remove it. Afterwards, take out the brake lines from the ABM. Remove the final piece by pulling the ABM unit out of the bracket.