OEM 2007 Dodge Nitro Parking Brake Shoe

2007 Dodge Nitro Parking Brake Shoe Parts and Q&A

• Q: When Should Parking Brake Shoe Riveted and Bonded Linings Be Replaced, and What Inspections Are Necessary on 2007 Dodge Nitro?

  A: Riveted brake shoes ought to be changed once the thickness reaches 0.78 mm near the rivet heads, whereas bonded lining should be changed when it reaches 1.6 mm. Look at the inner sole contact area; if the pattern is wide and even, the shoes are fine, but if shoes only touch on one side, they should be swapped and the drum should be checked for runout or taper. Look over the adjuster screw assembly and get a new one if the star wheel or threads are damaged or if corrosion or rust is very severe. If brake springs or retainer parts are worn, distorted or collapsed, remove them and replace them. If brake drag has happened, replace the springs since overheating could weaken them. Check the brake shoe contact pads on the support plate and if any are worn or rusted or if the plate is bent or warped, change the support plate.