How to Service and Repair a Parking Brake Cable on 2007 Dodge Nitro?

Make sure the parking brake cables are locked and lift out the rear seat to work on them. After that, pull the rear of the carpet forward enough to see and reach the parking brake cables through the floor. After disconnecting the two wires from the equalizer, remove the cables from the mount with a suitable box end wrench at the points marked by tangs. Pull each cable through the floor with the grommets. After taking out the stabilizer bar bracket retainer, unfasten the park brake cable from it and then put the existing tightener back on the bracket. With a suitable box end wrench, fit it over the tangs and remove the cable from the bracket on the axle and finally, get rid of the brake cable from the lever.

OEM 2007 Dodge Nitro Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Cables found

View related parts
2007 Dodge Nitro Rear Cable Part Number: 52129231AH
$68.85 MSRP: $105.00
You Save: $36.15 (35%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52129231AE, 52129231AC, 52129231AD, 52129231AG, 52129231AF
- Item Weight: 2.10 Pounds
- Item Dimensions: 35.0 x 14.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129231AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Rear Cable Part Number: 52129230AH
$65.84 MSRP: $98.60
You Save: $32.76 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52129230AC, 52129230AG, 52129230AD, 52129230AE
- Item Weight: 2.30 Pounds
- Item Dimensions: 25.0 x 20.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129230AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Parking Brake Cable Parts and Q&A

Q: How to Service and Repair a Parking Brake Cable on 2007 Dodge Nitro?
A: Make sure the parking brake cables are locked and lift out the rear seat to work on them. After that, pull the rear of the carpet forward enough to see and reach the parking brake cables through the floor. After disconnecting the two wires from the equalizer, remove the cables from the mount with a suitable box end wrench at the points marked by tangs. Pull each cable through the floor with the grommets. After taking out the stabilizer bar bracket retainer, unfasten the park brake cable from it and then put the existing tightener back on the bracket. With a suitable box end wrench, fit it over the tangs and remove the cable from the bracket on the axle and finally, get rid of the brake cable from the lever.