How to Properly Remove and Service a Wheel Bearing on 2007 Dodge Nitro?

To start, lift and support the vehicle, then remove the tire and wheel. After that, remove the caliper adapter, making sure that the disc brake caliper is stable and doesn't damage the hose. When you are finished with the mounting bracket, unbolt the disc brake rotor and the wheel speed sensor. If your truck uses four-wheel drive, go ahead and remove the axle shaft nut. After that, unfasten the three mounting bolts for the hub/bearing and remove the hub/bearing.

OEM 2007 Dodge Nitro Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Bearing found

View related parts
2007 Dodge Nitro Wheel Bearing, Rear Part Number: 3507898AB
$57.95 MSRP: $87.55
You Save: $29.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Axle Shaft; Drive Axle Shaft Bearing, Rear; Differential Bearing; Axle Bearing; Axle Bearings; Bearing Assembly; Differential Cover Bearing; Bearing; Bearing Axle Shaft; Bearing Wheel
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.1 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3507898AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Wheel Bearing Parts and Q&A

Q: How to Properly Remove and Service a Wheel Bearing on 2007 Dodge Nitro?
A: To start, lift and support the vehicle, then remove the tire and wheel. After that, remove the caliper adapter, making sure that the disc brake caliper is stable and doesn't damage the hose. When you are finished with the mounting bracket, unbolt the disc brake rotor and the wheel speed sensor. If your truck uses four-wheel drive, go ahead and remove the axle shaft nut. After that, unfasten the three mounting bolts for the hub/bearing and remove the hub/bearing.