How to Service and Repair a Shock Absorber by Removing the Clevis Bracket Bushing on 2007 Dodge Nitro?

The first thing to do in servicing the shock absorber is take out the wheel and tire, then proceed with disc brake assembly and the wheel speed sensor. After that, separate the lower stabilizer link from the bottom of the control arm and undo the lower clevis bolt at that point. Once the ball joint is loose, take of the upper ball joint nut and use the special tool 9360 separator to free the upper ball joint from the knuckle. Get the control arm down to allow pressing the tool on, using a lot of lubricant on the threaded parts so it will remain strong and perform well during changing. Finally, remove the bushing with specially designed tools C-4212F, 9956 and 9653-1 (Press, Receiver, Driver).

OEM 2007 Dodge Nitro Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shock Absorbers found

View related parts
2007 Dodge Nitro Shock Absorber, Rear Part Number: 52125307AB
$84.57 MSRP: $128.00
You Save: $43.43 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber, Rear;Strut/Coil Kit;ABS;Complete Strut; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 52125307AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 19.1 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52125307AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Shock Absorber, Front Part Number: 68003954AC
$120.16 MSRP: $179.00
You Save: $58.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Suspension Strut, Front; Suspension Shock Absorber; Shock; Strut
- Position: Front
- Replaces: 68003954AA, 68003954AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003954AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Shock Absorber, Front Part Number: 68003952AC
$159.10 MSRP: $211.00
You Save: $51.90 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Suspension Strut, Front; Suspension Shock Absorber; Shock; Strut; Shock Absorber Package Suspension Front
- Position: Front
- Replaces: 68003952AB
- Item Weight: 6.30 Pounds
- Item Dimensions: 16.9 x 8.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68003952AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Shock Absorber, Rear Part Number: 52109912AD
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber, Rear;Strut/Coil Kit;ABS;Complete Strut; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 52109912AC
- Item Weight: 6.50 Pounds
- Item Dimensions: 4.2 x 3.6 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109912AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Shock Absorber Parts and Q&A

Q: How to Service and Repair a Shock Absorber by Removing the Clevis Bracket Bushing on 2007 Dodge Nitro?
A: The first thing to do in servicing the shock absorber is take out the wheel and tire, then proceed with disc brake assembly and the wheel speed sensor. After that, separate the lower stabilizer link from the bottom of the control arm and undo the lower clevis bolt at that point. Once the ball joint is loose, take of the upper ball joint nut and use the special tool 9360 separator to free the upper ball joint from the knuckle. Get the control arm down to allow pressing the tool on, using a lot of lubricant on the threaded parts so it will remain strong and perform well during changing. Finally, remove the bushing with specially designed tools C-4212F, 9956 and 9653-1 (Press, Receiver, Driver).