How to Service and Repair a Blower Motor Under the Passenger Side Instrument Panel on 2007 Dodge Ram 1500?

For blower motor service or repair at the passenger side under the instrument panel, isolate the negative battery cable first. After that, remove the passenger side cowl trim panel and unplug the HVAC wire harness lead from the blower motor. Remove the lead from the two retainer connectors. After that, unscrew the three screws holding the blower motor to the bottom part of the HVAC and pull the blower motor out from the housing.

OEM 2007 Dodge Ram 1500 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2007 Dodge Ram 1500 Blower Motor Part Number: 5096255AA
$210.74 MSRP: $314.00
You Save: $103.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; HVAC Blower Motor; HVAC Blower Motor and Wheel; Blower Assembly; Motor Blower With Wheel Includes: Motor, Fan, Clamp, Screws, Seal.
- Replaces: 5096256AA, 68031462AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 10.4 x 10.2 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5096255AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Ram 1500 Blower Motor Parts and Q&A

Q: How to Service and Repair a Blower Motor Under the Passenger Side Instrument Panel on 2007 Dodge Ram 1500?
A: For blower motor service or repair at the passenger side under the instrument panel, isolate the negative battery cable first. After that, remove the passenger side cowl trim panel and unplug the HVAC wire harness lead from the blower motor. Remove the lead from the two retainer connectors. After that, unscrew the three screws holding the blower motor to the bottom part of the HVAC and pull the blower motor out from the housing.