How to install Parking Brake Shoes on 2007 Dodge Ram 1500?

The first step in installing parking brake shoes is to put the rear park brake shoes back together. After that, install the axleshaft and then tie the park brake cable to the lever on the back of the support plate and unlock the park brake cable. After that, slot the disc brake rotor in place and secure the disc brake caliper. When done, change the rear brake shoes, add the tire to the wheel and assemble them and finally drop the car down. The system should be conditioned on any new vehicle or after replacing the parking brake lining by testing it with a stop from 25 mph on a dry surface, while applying some force on the parking brake pedal.

OEM 2007 Dodge Ram 1500 Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

View related parts
2007 Dodge Ram 1500 Parking Brake Shoes, Rear Part Number: 68001472AB
$47.49 MSRP: $71.60
You Save: $24.11 (34%)
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5080568AC, 5080568AB, 68001472AA
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.9 x 5.4 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001472AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10

2007 Dodge Ram 1500 Parking Brake Shoe Parts and Q&A

Q: How to install Parking Brake Shoes on 2007 Dodge Ram 1500?
A: The first step in installing parking brake shoes is to put the rear park brake shoes back together. After that, install the axleshaft and then tie the park brake cable to the lever on the back of the support plate and unlock the park brake cable. After that, slot the disc brake rotor in place and secure the disc brake caliper. When done, change the rear brake shoes, add the tire to the wheel and assemble them and finally drop the car down. The system should be conditioned on any new vehicle or after replacing the parking brake lining by testing it with a stop from 25 mph on a dry surface, while applying some force on the parking brake pedal.