How to Service and Repair a Driveshaft Center Support Bearing on 2007 Dodge Ram 1500?

To handle repairs and support for the center section, take off the rear propeller shaft at the beginning. Add reference marks for installation to the shaft and slip yoke. After that, take out the slip joint boot clamp. Take off the boot from the boot collar, then open up the split between the shafts. Attach Position Bearing Splitter Tool 1130 between the slinger and the driveshaft center support bearing. After that, install Bridge 938 onto the splitter and remove the middle bearing.

OEM 2007 Dodge Ram 1500 Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Driveshaft Center Support Bearings found

View related parts
2007 Dodge Ram 1500 Center Bearing Part Number: 5014097AA
$191.48 MSRP: $284.00
You Save: $92.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Center Support Bearing; Center Bearing Drive Shaft; Bearing Kit Drive Shaft
- Item Weight: 3.80 Pounds
- Item Dimensions: 3.5 x 7.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5014097AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, SRT-10, SS/T 5.9L, ST, SXT, Sport, TRX4, WS | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2007 Dodge Ram 1500 Center Bearing Part Number: 5135580AA
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Center Support Bearing; Center Bearing Drive Shaft; Bearing Kit Drive Shaft
- Item Weight: 3.60 Pounds
- Item Dimensions: 10.5 x 5.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135580AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Dodge Ram 1500 Driveshaft Center Support Bearing Parts and Q&A

Q: How to Service and Repair a Driveshaft Center Support Bearing on 2007 Dodge Ram 1500?
A: To handle repairs and support for the center section, take off the rear propeller shaft at the beginning. Add reference marks for installation to the shaft and slip yoke. After that, take out the slip joint boot clamp. Take off the boot from the boot collar, then open up the split between the shafts. Attach Position Bearing Splitter Tool 1130 between the slinger and the driveshaft center support bearing. After that, install Bridge 938 onto the splitter and remove the middle bearing.