Other Name: Cover - Timing Case; Engine Timing Cover, Inner; Inner Timing Cover; Outer Timing Cover; Cover Timing Case See Note; Cover Timing Case; Timing Cover
Position: Inner
Item Weight: 2.90 Pounds
Item Dimensions: 18.8 x 18.6 x 6.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68005078AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL
2007 Dodge Ram 2500 Timing Cover Parts and Q&A
Q: How to Install the Timing Cover and Its Components on 2007 Dodge Ram 2500?
A: Before you install the timing cover, first wash the block and timing chain cover well, then install a brand-new gasket. Check that the timing cover bushings are correctly fixed, place the cover on the engine, add the new gasket and tighten all fasteners (28 Nm) except the large lifting stud (55 Nm). After that, fit the oil pan and pick up tube, then move on to the A/C compressor, generator, power steering pump, dipstick support bolt, thermostat housing, crankshaft damper, accessory drive belt tensioner assembly and both idler pulleys. Then, fit the lower radiator hose, two heater hoses, radiator fan shroud, fan and fan drive, accessory drive belt, coolant and washer bottles, the upper radiator hose and air cleaner assembly. After that, add coolant to the cooling system, change the engine oil and connect the battery's negative terminal.