Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
Position: Front Driver Side
Replaces: 68010012AA
Item Weight: 2.60 Pounds
Item Dimensions: 11.0 x 10.6 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68017889AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
Position: Front Passenger Side
Replaces: 68010100AA
Item Weight: 1.90 Pounds
Item Dimensions: 10.2 x 9.5 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68017891AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
Other Name: Latch - Cargo Door; Sliding Door Latch; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Latch; Latch Cargo Door
Item Weight: 0.40 Pounds
Item Dimensions: 5.1 x 4.2 x 3.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5104357AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
Other Name: Latch - Rear Door; Door Latch Assembly, Rear Right Lower; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock; Latch Rear Door Includes Cable And Actuator; Door Latch Assembly
Position: Rear Lower Passenger Side
Item Weight: 2.50 Pounds
Item Dimensions: 13.5 x 13.4 x 6.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68017888AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
2007 Dodge Sprinter 2500 Door Latch Assembly Parts and Q&A
Q: How to Service and Repair a Rear Door Latch Assembly for Right Door on 2007 Dodge Sprinter 2500?
A: First, let's take off the lower door trim (6), upper door trim (8) and the inside door handle (7). Using a grease pencil, mark the spot for the upper door latch (1) while it's removed. Then, lift the top door latch (1), move the release lever (10) away from the lock cylinder (11) and lose the bolts (2) fastening the door latch (3). After that, unscrew the cables from inside the door handle, then, when you turn the door latch clockwise toward the door's center, pull it along with the cables and locking rod. Unplug the cable from the outer door handle and take out the electrical connector from the latch assembly (3) before you remove the whole latch assembly (3) from the door. To disconnect the upper door latch, again note where it is with a grease pencil, remove the bolts (1) and also pull the cable (3) away from the latch (2).