How to Service and Repair a Steering Knuckle on 2007 Dodge Sprinter 3500?

Start by raising and supporting the vehicle and then take off the front wheels to reach the steering knuckle. Later, remove the outer tie rod-end nut and then use 9360 special tool to cut the tie rod free from the steering knuckle. After that, take off the tie rod end shield, then the bolts holding the disc brake caliper adapter and the rotor set screw. Take out the wheel speed sensor nut attached to the knuckle and then remove the sensor from the knuckle. Once that is done, take out the lower ball joint nut and use tool 9282 to separate the ball joint from the steering knuckle. Go on to remove the bolts that connect the strut onto the knuckle, remove the strut from the knuckle and then pull out the steering knuckle.

OEM 2007 Dodge Sprinter 3500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2007 Dodge Sprinter 3500 Knuckle, Front Passenger Side Part Number: 68006692AB
Product Specifications
- Other Name: Steering Knuck - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 68006692AA
- Item Weight: 35.10 Pounds
- Item Dimensions: 16.2 x 12.1 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68006692AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Knuckle, Front Driver Side Part Number: 68006693AB
Product Specifications
- Other Name: Steering Knuck - Front; Wheel Bearing and Hub Assembly, Front Left; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 68006693AA
- Item Weight: 32.80 Pounds
- Item Dimensions: 11.3 x 11.2 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68006693AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 3500 Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2007 Dodge Sprinter 3500?
A: Start by raising and supporting the vehicle and then take off the front wheels to reach the steering knuckle. Later, remove the outer tie rod-end nut and then use 9360 special tool to cut the tie rod free from the steering knuckle. After that, take off the tie rod end shield, then the bolts holding the disc brake caliper adapter and the rotor set screw. Take out the wheel speed sensor nut attached to the knuckle and then remove the sensor from the knuckle. Once that is done, take out the lower ball joint nut and use tool 9282 to separate the ball joint from the steering knuckle. Go on to remove the bolts that connect the strut onto the knuckle, remove the strut from the knuckle and then pull out the steering knuckle.