How to Replace a Headlight Bulb on 2007 Jeep Commander?

Before starting any headlamp servicing, remove and separate the battery negative cable. Get rid of the cover that is located over the front lamp unit. Afterwards, separate the pigtail wire connector at the back of the front lamp unit housing, from the connector receptacle attached to the low beam or high beam bulb base. Grasp the base and rotate it in the opposite direction, about a quarter-turn, to let go of the lock. After that, pull the bulb and its base straight out of the opening on the reflector. Precautions should be taken so no oil, finer or dirt from your hand enters the bulb glass. The procedure is used for both low and high beam bulbs, although differences can be seen in the bulb location, shape and type.

OEM 2007 Jeep Commander Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Headlight Bulbs found

View related parts
2007 Jeep Commander Headlamp Bulb, Front Part Number: L0009005
$25.20 MSRP: $37.00
You Save: $11.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Headlamps; Composite Bulb; Lower Beam Bulb; Exterior Bulbs.
- Position: Front
- Replaces: MS820959
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009005
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Headlamp Bulb, Front Part Number: L0009006PV
$14.57 MSRP: $27.70
You Save: $13.13 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Lower Beam Bulb; Bulb Headlamp
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.5 x 2.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009006PV
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Headlight Bulb Parts and Q&A

Q: How to Replace a Headlight Bulb on 2007 Jeep Commander?
A: Before starting any headlamp servicing, remove and separate the battery negative cable. Get rid of the cover that is located over the front lamp unit. Afterwards, separate the pigtail wire connector at the back of the front lamp unit housing, from the connector receptacle attached to the low beam or high beam bulb base. Grasp the base and rotate it in the opposite direction, about a quarter-turn, to let go of the lock. After that, pull the bulb and its base straight out of the opening on the reflector. Precautions should be taken so no oil, finer or dirt from your hand enters the bulb glass. The procedure is used for both low and high beam bulbs, although differences can be seen in the bulb location, shape and type.