How to Properly Service and Repair a Headlight Bulb on 2008 Jeep Commander?

Whenever you need to replace the headlamp bulb, use the correct sized and type so that no part gets hot or damaged. Don't touch the bulb glass or let it contact greasy places, since this can reduce its lifespan. The method works for both low-beam and high-beam bulbs, using the same steps, but the bulbs are different in location, size and type. Initially, insert the base of your low beam or high beam bulb into the opening at the back of the reflector that matches the key. Secure the bulb and base in the reflector until it is tight, next, rotate the base about 30 degrees clockwise to ensure it can't move further. Attach the pigtail wire back to the connector receptacle on the lamp housing's back side and then place the front lamp unit cover on the lamp. In the last step, attach the negative battery cable to its terminal again.

OEM 2008 Jeep Commander Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Headlight Bulbs found

View related parts
2008 Jeep Commander Headlamp Bulb, Front Part Number: L0009005
$25.20 MSRP: $37.00
You Save: $11.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Headlamps; Composite Bulb; Lower Beam Bulb; Exterior Bulbs.
- Position: Front
- Replaces: MS820959
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009005
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Headlamp Bulb, Front Part Number: L0009006PV
$14.57 MSRP: $27.70
You Save: $13.13 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Lower Beam Bulb; Bulb Headlamp
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.5 x 2.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009006PV
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Headlight Bulb Parts and Q&A

Q: How to Properly Service and Repair a Headlight Bulb on 2008 Jeep Commander?
A: Whenever you need to replace the headlamp bulb, use the correct sized and type so that no part gets hot or damaged. Don't touch the bulb glass or let it contact greasy places, since this can reduce its lifespan. The method works for both low-beam and high-beam bulbs, using the same steps, but the bulbs are different in location, size and type. Initially, insert the base of your low beam or high beam bulb into the opening at the back of the reflector that matches the key. Secure the bulb and base in the reflector until it is tight, next, rotate the base about 30 degrees clockwise to ensure it can't move further. Attach the pigtail wire back to the connector receptacle on the lamp housing's back side and then place the front lamp unit cover on the lamp. In the last step, attach the negative battery cable to its terminal again.