How to Remove and Replace Exhaust Valve and Intake Valves in a Cylinder Head on 2007 Jeep Commander?

To change intake and exhaust valve, remove cylinder heads, rocker arms, and camshaft. A valve spring compressor is used to pull out the valve springs and retainers. Check valve springs for wear. Tool C-647 is used for testing load on the valve springs. Replace any springs that are out of spec before reinstalling the valves.

OEM 2007 Jeep Commander Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Valves found

View related parts
2007 Jeep Commander Intake Valve Part Number: 53020747AB
$46.65 MSRP: $94.55
You Save: $47.90 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard 3 Per Cylinder Head; Valve Intake Standard
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020747AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Jeep Commander Intake Valve Part Number: 53021550AA
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 53021550AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS

2007 Jeep Commander Intake Valve Parts and Q&A

Q: How to Remove and Replace Exhaust Valve and Intake Valves in a Cylinder Head on 2007 Jeep Commander?
A: To change intake and exhaust valve, remove cylinder heads, rocker arms, and camshaft. A valve spring compressor is used to pull out the valve springs and retainers. Check valve springs for wear. Tool C-647 is used for testing load on the valve springs. Replace any springs that are out of spec before reinstalling the valves.