How to Install a Wheel Bearing into the Knuckle on 2007 Jeep Commander?

Add the hub bearing (3) to the knuckle, placing on it the 3 bolts and torquing them to 115 Nm (85 ft. lbs.). After that, screw in and connect the wheel speed sensor and its nut (2). The next steps are to set the brake rotor (1), then place the brake caliper adaptor (1) and finally snap in the caliper (1). After that, install the wheel and tire assembly, remove the support and let the vehicle down.

OEM 2007 Jeep Commander Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Bearing found

View related parts
2007 Jeep Commander Hub & Bearing, Rear Part Number: 52111884AB
$329.29 MSRP: $497.00
You Save: $167.71 (34%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Wheel; Rear Wheel Bearing and Hub Assembly; Repair Kit; Assembly; Bearing Kit.; Hub And Bearing Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Rear
- Replaces: 52111884AA
- Item Weight: 13.20 Pounds
- Item Dimensions: 8.4 x 7.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111884AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Wheel Bearing Parts and Q&A

Q: How to Install a Wheel Bearing into the Knuckle on 2007 Jeep Commander?
A: Add the hub bearing (3) to the knuckle, placing on it the 3 bolts and torquing them to 115 Nm (85 ft. lbs.). After that, screw in and connect the wheel speed sensor and its nut (2). The next steps are to set the brake rotor (1), then place the brake caliper adaptor (1) and finally snap in the caliper (1). After that, install the wheel and tire assembly, remove the support and let the vehicle down.