How to Service and Repair a Right Front Shock Absorber on 2007 Jeep Commander?

Service the right front shock absorber by first removing the air box cover and air intake hose and next, disconnect the cruise control servo electrical connector. After that, loosen the coolant reservoir mounting bolt and slide the reservoir away. Loosen and take out the four nuts at the top of the shock mounts, lift the vehicle off the ground and remove the tire. Then, unscrew both brake adapter bolts, supporting the caliper and the adapter under it so the brake hose does not support it. First, take out the disc brake rotor, then unscrew the upper ball joint nut and use special tool 8677 to release the upper ball joint from the knuckle. Begin by taking out the lower clevis bolt at the lower control arm, then remove the lower stabilizer bolt and next, remove the shock from the vehicle. If you need to, take the spring out.

OEM 2007 Jeep Commander Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shock Absorbers found

View related parts
2007 Jeep Commander Shock Absorber, Rear Part Number: 52090247AJ
$86.97 MSRP: $131.00
You Save: $44.03 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Rear Shock Absorber; Strut and Coil Spring Assembly Kit; Complete Strut.; Shock; Shock Absorber Suspension Rear; Shock Absorber Suspension
- Position: Rear
- Replaces: 52090247AG, 52090247AI, 52090247AH
- Item Weight: 5.70 Pounds
- Item Dimensions: 30.6 x 7.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52090247AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Shock Absorber Part Number: 5166820AI
$246.42 MSRP: $376.00
You Save: $129.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Strut and Shock Assembly Kit; Complete Strut; Shock.; Shock Absorber Package Suspension Front; Shock Absorber Kit Suspension Front
- Replaces: 5166820AF, 5166820AH, 5166820AG
- Item Weight: 9.40 Pounds
- Item Dimensions: 4.8 x 6.7 x 29.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166820AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Shock Absorber Parts and Q&A

Q: How to Service and Repair a Right Front Shock Absorber on 2007 Jeep Commander?
A: Service the right front shock absorber by first removing the air box cover and air intake hose and next, disconnect the cruise control servo electrical connector. After that, loosen the coolant reservoir mounting bolt and slide the reservoir away. Loosen and take out the four nuts at the top of the shock mounts, lift the vehicle off the ground and remove the tire. Then, unscrew both brake adapter bolts, supporting the caliper and the adapter under it so the brake hose does not support it. First, take out the disc brake rotor, then unscrew the upper ball joint nut and use special tool 8677 to release the upper ball joint from the knuckle. Begin by taking out the lower clevis bolt at the lower control arm, then remove the lower stabilizer bolt and next, remove the shock from the vehicle. If you need to, take the spring out.