Other Name: Arm - Lower Control; Suspension Control Arm, Rear Lower; Arm Lower Control Rear; Suspension Control Arm; Control Arm
Position: Rear Lower
Replaces: 52089630AB
Item Weight: 5.90 Pounds
Item Dimensions: 2.7 x 2.9 x 20.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52089630AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2007 Jeep Commander Control Arm Parts and Q&A
Q: How to Service and Repair a Control Arm on 2007 Jeep Commander?
A: You should lift the vehicle, then support the axle before servicing or repairing the control arm. Then, take out the tire and wheel and, after that, the inner fender well (2). After that, detach the upper ball joint retaining nut and pull the upper ball joint (2) off the knuckle (3) using special tool #8677 (1). After these steps, take out the nut (1) and bolt that attaches the upper control arm (5) to the vehicle's body and then remove the upper control arm (5) from the vehicle.