How to Install a Knock Sensor on a 2.0/2.4L Engine on 2007 Jeep Compass?

The knock sensor for this engine bolts onto the cylinder block next to the starter, in a place under the intake manifold. The first thing to do is link the electrical connector with the knock sensor. After that, set the knock sensor and tighten the bolt using 22 Nm (195 in. lbs.); tightening it more or less could affect the knock sensor and can cause improper control of the spark. After that, secure the negative battery cable in its place.

OEM 2007 Jeep Compass Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2007 Jeep Compass Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Compass Submodels:
- 75th Anniversary, 80th Anniversary, Altitude, Base, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Jeep Compass Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor on a 2.0/2.4L Engine on 2007 Jeep Compass?
A: The knock sensor for this engine bolts onto the cylinder block next to the starter, in a place under the intake manifold. The first thing to do is link the electrical connector with the knock sensor. After that, set the knock sensor and tighten the bolt using 22 Nm (195 in. lbs.); tightening it more or less could affect the knock sensor and can cause improper control of the spark. After that, secure the negative battery cable in its place.