How to Safely Extract the Crankshaft from an Engine on 2007 Jeep Grand Cherokee?

The engine will have to be taken out of the car to disassemble the engine and remove the crankshaft. First remove the engine and the engine oil pump. Remember not to pry on the oil pan gasket when removing the pan because there are three locations that the oil pan gasket is mounted to the cylinder block and it will stay attached when the oil pan is removed. The next thing to do is to remove the bedplate mounting bolts making note of the two stud bolts for reinstallation. Disconnect connecting rods from the crankshaft; do not damage the critical sealing surface of the bedplate to cylinder block mating surface. The bedplate and the lower main bearing halves are contained in the bedplate, so handle it carefully and do not allow these halves to drop or be damaged, as this can very easily result in severe crankshaft damage. Loosen and remove the bedplate carefully using only the pry points cast into the bedplate. Finally, remove the crankshaft, this is where care must be taken not to damage the bearing surfaces.

OEM 2007 Jeep Grand Cherokee Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshafts found

View related parts
2007 Jeep Grand Cherokee Crankshaft Part Number: 53020959AB
$629.85 MSRP: $959.00
You Save: $329.15 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshft; Crankshaft See Note
- Item Weight: 48.20 Pounds
- Item Dimensions: 28.4 x 10.1 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020959AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Grand Cherokee Crankshaft Part Number: 68136832AB
$443.12 MSRP: $2810.00
You Save: $2366.88 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshft
- Replaces: 68136832AA, 68018731AA, 5175344AA, 5179462AA
- Item Weight: 60.00 Pounds
- Item Dimensions: 21.3 x 13.2 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68136832AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Jeep Grand Cherokee Crankshaft Part Number: 53021302AD
Product Specifications
- Other Name: Crankshft; Crankshaft Includes Tone Ring And Tone Ring Mounting Screws
- Item Weight: 64.00 Pounds
- Item Dimensions: 29.6 x 8.5 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021302AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Grand Cherokee Crankshaft Part Number: 5037458BD
Product Specifications
- Other Name: Crankshft
- Replaces: 5037458AB, 5037458AC, 5037458AA
- Item Weight: 84.20 Pounds
- Item Dimensions: 32.7 x 11.6 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037458BD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Crankshaft Part Number: 53021387AA
Product Specifications
- Other Name: Crankshft
- Item Weight: 59.60 Pounds
- Item Dimensions: 30.6 x 9.3 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021387AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Jeep Grand Cherokee Crankshaft Parts and Q&A

Q: How to Safely Extract the Crankshaft from an Engine on 2007 Jeep Grand Cherokee?
A: The engine will have to be taken out of the car to disassemble the engine and remove the crankshaft. First remove the engine and the engine oil pump. Remember not to pry on the oil pan gasket when removing the pan because there are three locations that the oil pan gasket is mounted to the cylinder block and it will stay attached when the oil pan is removed. The next thing to do is to remove the bedplate mounting bolts making note of the two stud bolts for reinstallation. Disconnect connecting rods from the crankshaft; do not damage the critical sealing surface of the bedplate to cylinder block mating surface. The bedplate and the lower main bearing halves are contained in the bedplate, so handle it carefully and do not allow these halves to drop or be damaged, as this can very easily result in severe crankshaft damage. Loosen and remove the bedplate carefully using only the pry points cast into the bedplate. Finally, remove the crankshaft, this is where care must be taken not to damage the bearing surfaces.