How to Correctly Install an Exhaust Manifold on 2007 Jeep Grand Cherokee?

If as you remove nuts you also remove the studs, you need to install new studs, placing some sealer on the coarse thread ends to protect against water leaks. Arrange the engine exhaust manifold and the gasket near the two studs on the cylinder head and fasten conical washers and nuts on those studs. After installing the conical washers, tighten the bolts and nuts on the center arm and then moving outward to all bolts, setting torque to 25 Nm (18 ft. lbs.) Following that, add the exhaust heat shields and use the hoist to raise and support the vehicle, being careful not to tighten the heat shield nuts too firmly. After that, attach the exhaust pipe to the manifold and secure everything with bolts, nuts and retainers at a torque of 34 Nm (25 ft. lbs.). The actions for the left exhaust manifold are the same, including using new studs when needed and observing the same torque and precautions used earlier.

OEM 2007 Jeep Grand Cherokee Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Exhaust Manifolds found

View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Driver Side Part Number: 53013599AB
$143.74 MSRP: $216.00
You Save: $72.26 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Item Weight: 10.70 Pounds
- Item Dimensions: 19.2 x 8.4 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013599AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Passenger Side Part Number: 53013692AB
$261.72 MSRP: $387.00
You Save: $125.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Replaces: 53013692AA
- Item Weight: 6.90 Pounds
- Item Dimensions: 13.3 x 5.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013692AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Driver Side Part Number: 53013691AC
$266.26 MSRP: $396.00
You Save: $129.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Replaces: 53013691AB
- Item Weight: 7.10 Pounds
- Item Dimensions: 14.3 x 5.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013691AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Passenger Side Part Number: 68083889AD
$600.02 MSRP: $912.00
You Save: $311.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Replaces: 68047815AA, 68083889AC, 68040710AA, 5175746AA, 68052718AA, 68083889AB
- Item Weight: 7.00 Pounds
- Item Dimensions: 21.0 x 8.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68083889AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Passenger Side Part Number: 53013598AB
$151.73 MSRP: $200.00
You Save: $48.27 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 10.10 Pounds
- Item Dimensions: 20.4 x 7.0 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013598AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Driver Side Part Number: 68091721AC
$664.08 MSRP: $876.00
You Save: $211.92 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Replaces: 68047816AA, 5175747AA, 68052719AA, 68091721AA, 68040711AA, 68091721AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.7 x 5.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68091721AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Driver Side Part Number: 53013605AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Exhaust Manifold Gasket; Manifold Gasket; Manifold; Manifold Exhaust Reference Refer To 820 Exhaust Manifolds; Manifold Exhaust
- Position: Driver Side
- Item Weight: 10.80 Pounds
- Item Dimensions: 23.0 x 6.4 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013605AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Driver Side Part Number: 5037637AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Replaces: 5037637AC, 5037637AB
- Item Weight: 17.00 Pounds
- Item Dimensions: 27.9 x 10.3 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037637AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Passenger Side Part Number: 53013606AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust Reference Refer To 820 Exhaust Manifolds; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 12.00 Pounds
- Item Dimensions: 7.5 x 6.9 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013606AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Grand Cherokee Exhaust Manifold, Passenger Side Part Number: 5037638AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Replaces: 5037638AC, 5037638AB
- Item Weight: 17.40 Pounds
- Item Dimensions: 27.3 x 9.8 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037638AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Exhaust Manifold Parts and Q&A

Q: How to Correctly Install an Exhaust Manifold on 2007 Jeep Grand Cherokee?
A: If as you remove nuts you also remove the studs, you need to install new studs, placing some sealer on the coarse thread ends to protect against water leaks. Arrange the engine exhaust manifold and the gasket near the two studs on the cylinder head and fasten conical washers and nuts on those studs. After installing the conical washers, tighten the bolts and nuts on the center arm and then moving outward to all bolts, setting torque to 25 Nm (18 ft. lbs.) Following that, add the exhaust heat shields and use the hoist to raise and support the vehicle, being careful not to tighten the heat shield nuts too firmly. After that, attach the exhaust pipe to the manifold and secure everything with bolts, nuts and retainers at a torque of 34 Nm (25 ft. lbs.). The actions for the left exhaust manifold are the same, including using new studs when needed and observing the same torque and precautions used earlier.