How to Install a Headlight Bulb on 2007 Jeep Liberty?

Always replace the bulb in your North American headlamp with the correct type and size to protect the lamp, the socket and all wiring from damage. Don't use your hands to remove the bulb or store it other oily objects, because this may reduce its longevity. At first, set both the bulb and socket into the designated ring on the lock. Put the grille opening reinforcement wire harness connector back into the headlamp bulb socket connector receptacle. Then, place the ring, socket and bulb behind the upper radiator crossmember, so the holes in them align with the keyed area on the back of the headlamp unit. Place the socket and bulb in the headlamp housing facing the opening and tighten it until it fits properly. Set the lock ring onto the socket and lock it by rotating it about 30 degrees clockwise into the flange on the back of the headlamp housing. After that, reattach the battery negative cable.

OEM 2007 Jeep Liberty Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Headlight Bulbs found

View related parts
2007 Jeep Liberty Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L002825W5W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Liberty Headlamp Bulb, Front Part Number: L0009007QL
$24.35 MSRP: $35.75
You Save: $11.40 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Roof Lamp Bulb; Bulb; Bulb Headlamp
- Position: Front
- Replaces: MS820973, 154882AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L0009007QL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Liberty Turn Signal Bulb Part Number: 68604853AA
$12.60 MSRP: $18.45
You Save: $5.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Backup Lamp Bulb; Signal Lamp Bulb; Marker Lamp Bulb; Exterior Bulbs; Stoplamp Bulb; Taillamp Bulb; Bulbs
- Replaces: L0003757AK
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68604853AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2007 Jeep Liberty Headlight Bulb Parts and Q&A

Q: How to Install a Headlight Bulb on 2007 Jeep Liberty?
A: Always replace the bulb in your North American headlamp with the correct type and size to protect the lamp, the socket and all wiring from damage. Don't use your hands to remove the bulb or store it other oily objects, because this may reduce its longevity. At first, set both the bulb and socket into the designated ring on the lock. Put the grille opening reinforcement wire harness connector back into the headlamp bulb socket connector receptacle. Then, place the ring, socket and bulb behind the upper radiator crossmember, so the holes in them align with the keyed area on the back of the headlamp unit. Place the socket and bulb in the headlamp housing facing the opening and tighten it until it fits properly. Set the lock ring onto the socket and lock it by rotating it about 30 degrees clockwise into the flange on the back of the headlamp housing. After that, reattach the battery negative cable.