Other Name: Starter - Engine; Starter Motor; Starter Engine
Item Weight: 6.60 Pounds
Item Dimensions: 10.3 x 6.3 x 6.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56044735AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS
2007 Jeep Liberty Starter Motor Parts and Q&A
Q: How to Effectively Service and Repair a Starter Motor on 2007 Jeep Liberty?
A: Always ensure you disconnect the negative battery cable from the electrical connection when working with the starter motor. Support the car so the underside is clear, then unscrew the two bolts holding the left exhaust downpipe to the crossover pipe and set the downpipe aside so you can reach the propeller shaft. After that, disconnect the front propeller shaft and remove both heat shield bolts by the starter. Disconnect the starter heat shield, then remove the wire connector from the solenoid and remove the battery cable eyelet from the stud on the soleroid terminal. Once done, extract both of the starter mounting bolts. Stand the front side of the starter towards the rear and move it around so the solenoid is positioned below the starter. Later, separate the starter from the car by passing it between the exhaust pipe and the transmission bellhousing.