How to Install a Window Regulator for the Front Door on 2007 Jeep Patriot?

Set the regulator assembly on the door trim and make sure the runner support clips (6) snap into place. Attach the blue connector from the controller motor to the regulator where marked as 7. Do not tighten the lower regulator screws now. Second, attach the motor or manual lift screws (2) and after that, place in the door trim module (1).

OEM 2007 Jeep Patriot Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
2007 Jeep Patriot Window Regulator, Rear Part Number: 68002893AA
$125.78 MSRP: $189.00
You Save: $63.22 (34%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Regulator Rear Door Window
- Position: Rear
- Item Weight: 2.80 Pounds
- Item Dimensions: 26.3 x 10.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002893AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Window Regulator, Rear Part Number: 68002892AA
$107.53 MSRP: $161.00
You Save: $53.47 (34%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Regulator Rear Door Window
- Position: Rear
- Item Weight: 2.60 Pounds
- Item Dimensions: 5.2 x 9.9 x 26.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002892AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Window Regulator, Rear Part Number: 5291802AA
Product Specifications
- Other Name: Regulator - Rear Door Window; Regulator Rear Door Window
- Position: Rear
- Item Weight: 4.80 Pounds
- Item Dimensions: 26.0 x 13.5 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5291802AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Window Regulator Part Number: 5291801AA
Product Specifications
- Other Name: Regulator
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5291801AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Patriot Submodels:
- Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Window Regulator Part Number: 5291800AA
Product Specifications
- Other Name: Regulator
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5291800AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Patriot Submodels:
- Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Patriot Window Regulator, Rear Part Number: 5291803AA
Product Specifications
- Other Name: Regulator - Rear Door Window; Regulator Rear Door Window
- Position: Rear
- Item Weight: 5.30 Pounds
- Item Dimensions: 26.3 x 13.5 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5291803AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Jeep Patriot Window Regulator Parts and Q&A

Q: How to Install a Window Regulator for the Front Door on 2007 Jeep Patriot?
A: Set the regulator assembly on the door trim and make sure the runner support clips (6) snap into place. Attach the blue connector from the controller motor to the regulator where marked as 7. Do not tighten the lower regulator screws now. Second, attach the motor or manual lift screws (2) and after that, place in the door trim module (1).