How to Install Brake Pads on 2008 Chrysler Aspen?

Squeeze the brake pads on the rotor sides with a C-clamp before slipping an old brake shoe between the piston and the clamp. Take out the caliper mounting adapter and anti-rattle springs, clean each and then lubricate the anti-rattle springs only, as they are each specific to their side. Install the anti-rattle spring in the bottom first and afterwards, place it in the top. After that, put an inboard brake shoe in the adapter and then add the outboard brake shoe. Place the upper side of the caliper over the rotor and then drive the caliper assembly down over the adapter. First, place the caliper on the flange, then the wheel and tire assembly and drop the vehicle to the ground. Press your brakes several times so they seat fully, making the pedal firm and then make sure to refill the master cylinder with brake fluid.

OEM 2008 Chrysler Aspen Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Pads found

View related parts
2008 Chrysler Aspen Brake Pads, Front Part Number: 68334862AB
$126.90 MSRP: $189.00
You Save: $62.10 (33%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaces: 5143350AB, 5143350AC, 68334862AA
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.7 x 5.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68334862AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Brake Pads, Rear Part Number: 68334863AB
$88.20 MSRP: $132.00
You Save: $43.80 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Rear Disc Brake; Rear Pads
- Position: Rear
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.1 x 5.4 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68334863AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Brake Pads, Front Part Number: 1BP00284AA
$55.36 MSRP: $75.00
You Save: $19.64 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake
- Position: Front
- Replaces: 2AMV1350AB, V1013350AC, V1013550AA, 2AMV1350AC, 2AMV1350AA, V1013350
- Item Weight: 33.30 Pounds
- Item Dimensions: 15.5 x 10.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BP00284AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Brake Pads, Rear Part Number: 1BP00302AA
$23.20 MSRP: $33.35
You Save: $10.15 (31%)
Product Specifications
- Other Name: Shoe Kit - Rear Disc Brake
- Position: Rear
- Replaces: V2010563
- Item Weight: 35.00 Pounds
- Item Dimensions: 15.3 x 10.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BP00302AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Brake Pad Parts and Q&A

Q: How to Install Brake Pads on 2008 Chrysler Aspen?
A: Squeeze the brake pads on the rotor sides with a C-clamp before slipping an old brake shoe between the piston and the clamp. Take out the caliper mounting adapter and anti-rattle springs, clean each and then lubricate the anti-rattle springs only, as they are each specific to their side. Install the anti-rattle spring in the bottom first and afterwards, place it in the top. After that, put an inboard brake shoe in the adapter and then add the outboard brake shoe. Place the upper side of the caliper over the rotor and then drive the caliper assembly down over the adapter. First, place the caliper on the flange, then the wheel and tire assembly and drop the vehicle to the ground. Press your brakes several times so they seat fully, making the pedal firm and then make sure to refill the master cylinder with brake fluid.