How to Install Speed Sensor 3 on 2008 Chrysler Aspen?

Put the input speed sensor 3 in the transmission case and hold it in place with the bolt tightened to 12 Nm (105 in.lbs.). After that, attach the wiring connector to the input speed sensor. After the transmission is installed, look at the fluid in the system and add it if required, then lower the vehicle.

OEM 2008 Chrysler Aspen Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Speed Sensor found

View related parts
2008 Chrysler Aspen Speed Sensor, Rear Passenger Side Part Number: 56029317AB
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: 56029317AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 1.6 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Speed Sensor Parts and Q&A

Q: How to Install Speed Sensor 3 on 2008 Chrysler Aspen?
A: Put the input speed sensor 3 in the transmission case and hold it in place with the bolt tightened to 12 Nm (105 in.lbs.). After that, attach the wiring connector to the input speed sensor. After the transmission is installed, look at the fluid in the system and add it if required, then lower the vehicle.