How to Install an ABS Control Module Without Damaging the Pressure Sensor on 2008 Chrysler Aspen?

Don't damage the pressure sensor or touch the sensor terminals on the HCU side or the contact pads on the ABM side while attaching the Electronic Brake Control Module to the HCU on ESP vehicles. Articulate the pillars (2) and tighten their screws until they reach 2.5 Nm (22 in. lbs). Following installation, use a scan tool to complete the ABS verification test.

OEM 2008 Chrysler Aspen ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Chrysler Aspen Control Module Part Number: 68025874AB
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes
- Replaces: 68025874AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.3 x 9.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025874AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Modulator Valve Part Number: 68025873AB
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator; Control Unit Anti-Lock Brake
- Replaces: 68025873AA
- Item Weight: 5.90 Pounds
- Item Dimensions: 4.0 x 3.0 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025873AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Chrysler Aspen ABS Control Module Parts and Q&A

Q: How to Install an ABS Control Module Without Damaging the Pressure Sensor on 2008 Chrysler Aspen?
A: Don't damage the pressure sensor or touch the sensor terminals on the HCU side or the contact pads on the ABM side while attaching the Electronic Brake Control Module to the HCU on ESP vehicles. Articulate the pillars (2) and tighten their screws until they reach 2.5 Nm (22 in. lbs). Following installation, use a scan tool to complete the ABS verification test.