How to install Rear Coil Springs on 2008 Chrysler Crossfire?

First, fit the rear coil spring into its space in the suspension. Then, approve the lower control arm up and screw in the bolt to link it to the frame. Simply slip the spring over the spring perch to ensure it's sitting correctly in the detent. After that, install the lower shock mount to the lower control arm and tighten it to 55 Nm (41 ft. lbs.). After you've tightened everything, put in the control arm cover and secure it using the bolts. After that, join the wheel and tire assembly and make sure the vehicle's alignment is right.

OEM 2008 Chrysler Crossfire Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coil Springs found

View related parts
2008 Chrysler Crossfire Coil Spring, Front Part Number: 5135480AA
Product Specifications
- Other Name: Spring - Front Coil; Coil Spring, Front; Coil Springs; Spring; Spring Front Coil
- Position: Front
- Item Weight: 8.30 Pounds
- Item Dimensions: 16.0 x 8.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135480AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Coil Spring, Rear Part Number: 5102299AA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring; Spring Rear
- Position: Rear
- Item Weight: 5.90 Pounds
- Item Dimensions: 13.8 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102299AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Coil Springs Parts and Q&A

Q: How to install Rear Coil Springs on 2008 Chrysler Crossfire?
A: First, fit the rear coil spring into its space in the suspension. Then, approve the lower control arm up and screw in the bolt to link it to the frame. Simply slip the spring over the spring perch to ensure it's sitting correctly in the detent. After that, install the lower shock mount to the lower control arm and tighten it to 55 Nm (41 ft. lbs.). After you've tightened everything, put in the control arm cover and secure it using the bolts. After that, join the wheel and tire assembly and make sure the vehicle's alignment is right.