How to Service and Repair an HVAC Pressure Switch on 2008 Chrysler Crossfire?

The Refrigerant Pressure Sensor/Switch should be serviced and repaired only after you evacuate the A/C system. Afterward, unplug connector 2 from the HVAC pressure switch harness and take out the HVAC pressure switch from inside the receiver/dryer 1.

OEM 2008 Chrysler Crossfire HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 HVAC Pressure Switches found

View related parts
2008 Chrysler Crossfire Pressure Relief Valve Part Number: 5098395AA
$31.74 MSRP: $40.24
You Save: $8.50 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Pressure Relief; Compressor Relief Valve; Cut-Out Switch; HVAC Pressure Switch; Trinary Switch.; Pressure Switch; Pressure Valve; Valve A/C Pressure Relief
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098395AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Crossfire Submodels:
- Limited | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Pressure Switch Part Number: 68031513AA
$188.29 MSRP: $305.00
You Save: $116.71 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - A/C Pressure; Clutch Cycle; Compressor Cut-Out; System Valve Core; Trinary Switch.; Switch A/C Pressure
- Replaces: 5097873AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 1.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68031513AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire HVAC Pressure Switch Parts and Q&A

Q: How to Service and Repair an HVAC Pressure Switch on 2008 Chrysler Crossfire?
A: The Refrigerant Pressure Sensor/Switch should be serviced and repaired only after you evacuate the A/C system. Afterward, unplug connector 2 from the HVAC pressure switch harness and take out the HVAC pressure switch from inside the receiver/dryer 1.