How to Install an Idler Arm on 2008 Chrysler Crossfire?

You should begin by attaching the idler arm bushing to the idler arm (4), then put it in a position that matches the reference dimension. After that, secure the idler arm pinch bolt by tightening it to 30 Nm (22 ft. lbs.). Mount the idler arm onto your vehicle next, then install the nut and bolt on it and tighten them to 50 Nm (37 ft. lbs.). Following that, secure the heat shield (2) and link the drag link to the idler arm, with a tightening force of 50 Nm (37 ft. lbs.).

OEM 2008 Chrysler Crossfire Idler Arm

Steering Idler Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idler Arm found

View related parts
2008 Chrysler Crossfire Idler Arm Part Number: 5101586AA
Product Specifications
- Other Name: Arm - Idler; Steering Idler Arm; Pitman Arm; Arm Idler
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.3 x 2.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101586AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Idler Arm Parts and Q&A

Q: How to Install an Idler Arm on 2008 Chrysler Crossfire?
A: You should begin by attaching the idler arm bushing to the idler arm (4), then put it in a position that matches the reference dimension. After that, secure the idler arm pinch bolt by tightening it to 30 Nm (22 ft. lbs.). Mount the idler arm onto your vehicle next, then install the nut and bolt on it and tighten them to 50 Nm (37 ft. lbs.). Following that, secure the heat shield (2) and link the drag link to the idler arm, with a tightening force of 50 Nm (37 ft. lbs.).