How to Service and Repair a Rack and Pinion Steering System on 2008 Chrysler Crossfire?

Before servicing and repairing the rack and pinion, measure, with a caliper gauge, the distance of the point A between the pitman arm and the rack and pinion. You then remove the lower snap ring from the pitman shaft and pitman arm from the pitman shaft. Then remove the upper locking ring and pry out the pitman shaft seal from utilizing a suitable prying tool out from the housing of the rack and pinion.

OEM 2008 Chrysler Crossfire Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack And Pinion found

View related parts
2008 Chrysler Crossfire Steering Gear Part Number: 5096644AA
Product Specifications
- Other Name: Gear - Power Steering; Steering Gear Box; Steering Gearbox; Gear Assembly; Steering Gear Rack And Pinion; Gear Power Steering
- Item Weight: 28.30 Pounds
- Item Dimensions: 11.2 x 10.6 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5096644AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Rack And Pinion Parts and Q&A

Q: How to Service and Repair a Rack and Pinion Steering System on 2008 Chrysler Crossfire?
A: Before servicing and repairing the rack and pinion, measure, with a caliper gauge, the distance of the point A between the pitman arm and the rack and pinion. You then remove the lower snap ring from the pitman shaft and pitman arm from the pitman shaft. Then remove the upper locking ring and pry out the pitman shaft seal from utilizing a suitable prying tool out from the housing of the rack and pinion.