How to Install a Windshield Washer Nozzle on 2008 Chrysler Crossfire?

To install the windshield washer spray nozzle is by inserting the nozzle in the cowl grille and pushing down till the clip is seated. Slide the hose clamps on the hose and make them tight and ensure that 0.78 inch clearance is there. Reconnect any broken harness connectors and then install thermoswitch and cowl grille.

OEM 2008 Chrysler Crossfire Windshield Washer Nozzle

Front Windshield Washer Nozzle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Windshield Washer Nozzles found

View related parts
2008 Chrysler Crossfire Nozzle, Front Driver Side Part Number: 5099969AA
Product Specifications
- Other Name: Nozzle - Windshield Washer; Windshield Washer Nozzle, Front Left; Nozzle Windshield Washer
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 16.6 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099969AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Nozzle, Front Passenger Side Part Number: 5099970AA
Product Specifications
- Other Name: Nozzle - Windshield Washer; Windshield Washer Nozzle, Front Right; Nozzle Windshield Washer
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 21.4 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099970AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Windshield Washer Nozzle Parts and Q&A

Q: How to Install a Windshield Washer Nozzle on 2008 Chrysler Crossfire?
A: To install the windshield washer spray nozzle is by inserting the nozzle in the cowl grille and pushing down till the clip is seated. Slide the hose clamps on the hose and make them tight and ensure that 0.78 inch clearance is there. Reconnect any broken harness connectors and then install thermoswitch and cowl grille.