Other Name: Module - Body Controller; Module Body Controller
Item Weight: 1.40 Pounds
Item Dimensions: 10.6 x 8.2 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5082058AH
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2008 Chrysler Pacifica Body Control Module Parts and Q&A
Q: How to Safely Install a Body Control Module (BCM) on 2008 Chrysler Pacifica?
A: Place the BCM onto the mounting bracket, attach the four screws securing the BCM to the bulkhead. Hook up the five wire connectors to the BCM and slide the 72-way bulkhead connector over the BCM mounting assembly. At this point, put in the knee blocker air bag and the lower instrument panel silencer. Any replacement BCM should be configured using a scan tool along with DealerCONNECT(R). Before testing is complete, the negative battery cable should not be connected, as this could be very dangerous to people in the vehicle.