How to Install an Ignition Coil on a 3.8L Engine on 2008 Chrysler Pacifica?

First, make sure the ignition coil is lined up with the holes in the bracket mounting studs. Put the mounting nuts onto the threads and tighten them to 12 Nm (106 in. lbs.) afterward. Then put the ignition cables on to the coil and hook the electrical connector to the coil. After that, attach the negative battery cable and tighten the nut to 4.5 Nm (40 in. lbs.).

OEM 2008 Chrysler Pacifica Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2008 Chrysler Pacifica Ignition Coil Part Number: 4606869AD
$83.46 MSRP: $116.00
You Save: $32.54 (29%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil
- Replaces: 4606869AC, 4606869AB, 4606869AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.7 x 3.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606869AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Ignition Coil Part Number: 56032520AF
$115.96 MSRP: $174.00
You Save: $58.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition
- Replaces: 56032520AC, 56032520AE
- Item Weight: 3.40 Pounds
- Item Dimensions: 3.2 x 5.6 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56032520AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX | 3.8L V6, 6 Cyl 3.8 L GAS

2008 Chrysler Pacifica Ignition Coil Parts and Q&A

Q: How to Install an Ignition Coil on a 3.8L Engine on 2008 Chrysler Pacifica?
A: First, make sure the ignition coil is lined up with the holes in the bracket mounting studs. Put the mounting nuts onto the threads and tighten them to 12 Nm (106 in. lbs.) afterward. Then put the ignition cables on to the coil and hook the electrical connector to the coil. After that, attach the negative battery cable and tighten the nut to 4.5 Nm (40 in. lbs.).