How to Install a Seat Heater Switch in the Rear Floor Console on 2007 Chrysler Pacifica?

Install the rear heated switches by first putting them into the hole in the back of the floor console switch bezel, making sure the retaining tabs are snapped in place. After that, attach the wire harness connections to the rear heated seat switches. After that, push the rear floor console switch bezel into the console from the top so that its retaining tabs go fully into place. When you're finished with the rear floor console, attach the negative battery cable again and verify that the 2nd row heated seats are working.

OEM 2007 Chrysler Pacifica Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2007 Chrysler Pacifica Seat Switch, Passenger Side Part Number: UF24XDVAA
$5.51 MSRP: $6.98
You Save: $1.47 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF24XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Chrysler Pacifica Seat Switch, Driver Side Part Number: UF25XDVAA
Product Specifications
- Other Name: Switch; Seat Heater Switch, Left; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF25XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Seat Heater Switch Parts and Q&A

Q: How to Install a Seat Heater Switch in the Rear Floor Console on 2007 Chrysler Pacifica?
A: Install the rear heated switches by first putting them into the hole in the back of the floor console switch bezel, making sure the retaining tabs are snapped in place. After that, attach the wire harness connections to the rear heated seat switches. After that, push the rear floor console switch bezel into the console from the top so that its retaining tabs go fully into place. When you're finished with the rear floor console, attach the negative battery cable again and verify that the 2nd row heated seats are working.