Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Chrysler Pacifica Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

  • 2008 Chrysler Pacifica Water Pump - 4792968AF
    2008 Chrysler Pacifica Water Pump - 4792968AF
    2008 Chrysler Pacifica Water Pump Diagram - 4792968AF
    View related parts

    2008 Chrysler Pacifica Water Pump Part Number: 4792968AF

    $158.33 MSRP: $242.00
    You Save: $83.67 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump
    • Replaces: 4792968AD
    • Item Weight: 3.30 Pounds
    • Item Dimensions: 4.8 x 6.0 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4792968AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 3.5L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
  • 2008 Chrysler Pacifica Water Pump - 4648952AD
    2008 Chrysler Pacifica Water Pump Diagram - 4648952AD
    View related parts

    2008 Chrysler Pacifica Water Pump Part Number: 4648952AD

    $49.38 MSRP: $62.60
    You Save: $13.22 (22%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump; Pump Water
    • Replaces: 4648952AB
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 7.2 x 7.1 x 6.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4648952AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Pacifica Submodels:
    • Base, LX | 6 Cyl 3.8 L GAS

2008 Chrysler Pacifica Water Pump Parts and Q&A

  • Q: How to Replace a Water Pump on a 3.8L Engine on 2008 Chrysler Pacifica?
    A: Before removing and changing the water pump on your 3.8L engine, drain the cooling system. Following this, take the accessory drive belt off and then remove the belt shield. Then, detach the water pump pulley bolts with the pulley held in place between the water pump and the drive hub to pull it off. Hold one side of the pulley against the drive hub, rotate the pulley slowly until the holes match the spokes and then move the pulley inward between the hub and the housing. Once the pulley is fixed to position the water pump bolts, remove those bolts and take the water pump with the pulley loosely connected between the hub and the pump body. Remove the original seal and carefully scrub all inside sealing areas on the pump and the timing chain case cover, so as to not harm these areas.

Related 2008 Chrysler Pacifica Parts

Alternate Year Models

+
2007 Chrysler Pacifica Water Pump