How to Safely Service the Glove Box with an Active Airbag System on 2008 Chrysler PT Cruiser?

To service the glove box, you must first disable the air bag system by disconnecting the negative battery cable, and wait for two minutes. This is to prevent accidental deployment. Then, open the glove box, push in on both sides to pop the tabs and then carefully twist the glove box off the hinges.

OEM 2008 Chrysler PT Cruiser Glove Box

Glove Box Compartment

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Glove Boxes found

View related parts
2008 Chrysler PT Cruiser Glove Box Assembly, Beige/Taupe, Front Part Number: 1DD131KAAA
Product Specifications
- Other Name: Glove Box - Instrument Panel; Glove Box, Front; Glove Box Instrument Panel
- Position: Front
- Item Weight: 7.10 Pounds
- Item Dimensions: 19.2 x 17.7 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1DD131KAAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Glove Box Assembly, Gray, Front Part Number: 1DD131DAAA
Product Specifications
- Other Name: Glove Box - Instrument Panel; Glove Box, Front; Glove Box Instrument Panel
- Position: Front
- Replaces: 1DD13BDAAA
- Item Weight: 5.60 Pounds
- Item Dimensions: 20.5 x 20.0 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1DD131DAAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Glove Box Parts and Q&A

Q: How to Safely Service the Glove Box with an Active Airbag System on 2008 Chrysler PT Cruiser?
A: To service the glove box, you must first disable the air bag system by disconnecting the negative battery cable, and wait for two minutes. This is to prevent accidental deployment. Then, open the glove box, push in on both sides to pop the tabs and then carefully twist the glove box off the hinges.