Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
Base, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
2008 Chrysler PT Cruiser Window Regulator Parts and Q&A
Q: How to Service and Repair a Convertible Front Door Window Regulator on 2008 Chrysler PT Cruiser?
A: Position the door window regulator in the correct place, so its bolt heads are inserted into the keyhole openings inside the door panel. After that, fit the stabilizer channel onto the door panel and hold it in place by screwing nuts in it. Get both the rear and front nuts on the roller channel tight, then connect the bolts that join the window regulator base plate to the inside of the door. Adjust the top fastener forward, bottom fastener back, top rearward fastener and the bottom forward fastener on the window regulator plate. Fasten each of the five nuts that hold the regulator lift channel to the door glass and then plug the wire connector into the power window motor. Check and adjust the door glass and how it opens and closes if required. Then, attach the door water dam and the trim panel.