How to Remove and Replace a Front Brake Disc on 2008 Chrysler Town & Country?

It is important to clean the hub face where the rotor is attached before you remove the front brake rotor. After that, set the rotor carefully over the studs on the hub and bearing. After that, place the disc brake caliper and adapter bracket assembly onto the brake rotor and knuckle. Connect the bracket onto the knuckle with the mounting bolts and tighten them up to 169 Nm (125 ft. lbs.). Then put the wheel assembly on the vehicle and remember to tighten the nuts holding the wheel to 135 Nm (100 ft. lbs.). Bring the vehicle down and press the brake pedal a few times to get the pads in the right place on the rotor. Lastly, look at the brake fluid in the reservoir and top it up if necessary, then go for a drive, making several stops to pressure-fit the brake pads to the rotor.

OEM 2008 Chrysler Town & Country Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Discs found

View related parts
2008 Chrysler Town & Country Rotor, Rear Part Number: 4721996AB
$64.63 MSRP: $97.45
You Save: $32.82 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4721677AA, 4721996AA
- Item Weight: 13.40 Pounds
- Item Dimensions: 2.1 x 12.5 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721996AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Town & Country Rotor, Front Part Number: 4779783AB
$80.84 MSRP: $121.00
You Save: $40.16 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Brake Rotor
- Position: Front
- Replaces: 4721933AB, 4779783AA, 4721995AB
- Item Weight: 16.80 Pounds
- Item Dimensions: 2.0 x 12.2 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779783AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Town & Country Rotor, Front Part Number: 68032944AB
$102.31 MSRP: $151.00
You Save: $48.69 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 68032944AA
- Item Weight: 19.70 Pounds
- Item Dimensions: 12.9 x 13.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032944AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Brake Disc Parts and Q&A

Q: How to Remove and Replace a Front Brake Disc on 2008 Chrysler Town & Country?
A: It is important to clean the hub face where the rotor is attached before you remove the front brake rotor. After that, set the rotor carefully over the studs on the hub and bearing. After that, place the disc brake caliper and adapter bracket assembly onto the brake rotor and knuckle. Connect the bracket onto the knuckle with the mounting bolts and tighten them up to 169 Nm (125 ft. lbs.). Then put the wheel assembly on the vehicle and remember to tighten the nuts holding the wheel to 135 Nm (100 ft. lbs.). Bring the vehicle down and press the brake pedal a few times to get the pads in the right place on the rotor. Lastly, look at the brake fluid in the reservoir and top it up if necessary, then go for a drive, making several stops to pressure-fit the brake pads to the rotor.