How to Remove and Replace a Brake Disc on an SRT8 for Rear on 2008 Dodge Charger?

Before you change the rear brake rotor on an SRT8, it is necessary to check the brake pads and parking brake shoes. Clear away any dirt or rust from the place on the hub where the rotor is placed. Slide the brake rotor around the studs that are attached to the hub and bearing. Along with the calipers, slide the pads forward to the rotor and place the caliper with pads so that it is aligned with the knuckle. Fasten the caliper bolts and tighten them to approximately 130 Nm (96 ft. lbs.) torque. Take out the jack supporting the spring link and install the tire, getting the wheel on and nuts snug, with both bolts clocking in at 150 Nm (110 ft. lbs.). Don't start driving until you've lowered the vehicle and have tried the brakes a few times to make sure the brake pedal feels secure. Check and maintain the correct brake fluid level in the reservoir as you drive the car. When new brake rotors or pads are put on, you should know that there can be reduced braking power when you brake for the first time. A final step is to road test the car and stop a few times to remove any grime from the brakes and have the new pads burnished.

OEM 2008 Dodge Charger Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Discs found

View related parts
2008 Dodge Charger Rotor, Front Part Number: 68368065AA
$118.69 MSRP: $182.00
You Save: $63.31 (35%)
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5154118AB, 4779197AC, 4779197AF, 4779197AB, 4779197AG, 5154118AC, 4779197AD, 5154118AA, 4779197AE, 5154118AD
- Item Weight: 23.50 Pounds
- Item Dimensions: 2.6 x 14.0 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68368065AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Rotor, Rear Part Number: 5290538AE
$153.52 MSRP: $235.00
You Save: $81.48 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Brake Rotor
- Position: Rear
- Replaces: 5290538AB, 5290538AC, 5290538AD, 5290538AA
- Item Weight: 25.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290538AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Widebody, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Rotor, Rear Part Number: 68368070AA
$91.83 MSRP: $142.00
You Save: $50.17 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4779208AD, 4779208AG, 4779208AE, 4779208AH, 4779208AC, 4779208AB, 4779208AF
- Item Weight: 16.40 Pounds
- Item Dimensions: 3.3 x 13.1 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68368070AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Rotor, Front Part Number: 68368064AA
$98.15 MSRP: $151.00
You Save: $52.85 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Replaces: 4779196AE, 4779196AF, 4779196AD, 4779196AG, 4779196AB
- Item Weight: 20.20 Pounds
- Item Dimensions: 2.3 x 13.2 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68368064AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Widebody, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Rotor, Rear Part Number: 68368071AA
$116.51 MSRP: $179.00
You Save: $62.49 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4779209AB, 68368072AA, 4779209AE, 4779209AC, 4779209AD, 4779209AG, 68241042AA, 4779209AF, 68241042AB
- Item Weight: 19.70 Pounds
- Item Dimensions: 13.4 x 2.7 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68368071AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Rotor, Front Part Number: 5290537AD
$95.80 MSRP: $141.00
You Save: $45.20 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Brake Rotor
- Position: Front
- Replaces: 5290537AA, 5290537AB, 5290537AC
- Item Weight: 28.20 Pounds
- Item Dimensions: 14.9 x 14.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290537AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Rotor, Rear Part Number: 68368073AA
$117.59 MSRP: $180.00
You Save: $62.41 (35%)
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Hardware Kit; Rotor Brake Rear; Brake Rotor
- Position: Rear
- Replaces: 4779438AF, 4779438AB, 4779438AG, 4779438AE, 4779438AA, 4779438AD, 4779438AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68368073AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Charger Brake Disc Parts and Q&A

Q: How to Remove and Replace a Brake Disc on an SRT8 for Rear on 2008 Dodge Charger?
A: Before you change the rear brake rotor on an SRT8, it is necessary to check the brake pads and parking brake shoes. Clear away any dirt or rust from the place on the hub where the rotor is placed. Slide the brake rotor around the studs that are attached to the hub and bearing. Along with the calipers, slide the pads forward to the rotor and place the caliper with pads so that it is aligned with the knuckle. Fasten the caliper bolts and tighten them to approximately 130 Nm (96 ft. lbs.) torque. Take out the jack supporting the spring link and install the tire, getting the wheel on and nuts snug, with both bolts clocking in at 150 Nm (110 ft. lbs.). Don't start driving until you've lowered the vehicle and have tried the brakes a few times to make sure the brake pedal feels secure. Check and maintain the correct brake fluid level in the reservoir as you drive the car. When new brake rotors or pads are put on, you should know that there can be reduced braking power when you brake for the first time. A final step is to road test the car and stop a few times to remove any grime from the brakes and have the new pads burnished.