How to Remove the Parking Brake Shoe on Each Side on 2008 Dodge Charger?

You should start by getting under the vehicle and raising it to remove the parking brake shoes on both sides. After that, open up the rear hub and take out its bearing. Completely free up the screws that adjust the parking brake shoe. Take out the shipping spring first, then the shoe adjuster. Remove the upper radiator brake shoe hold-down clip and pin and next, the upper brake shoe from the return spring and lever. Take the return spring off the bottom of the shoe and take out the shoe actuator lever from the end of the cable. After that, get rid of the hold-down clip and pin beneath the lower brake shoe. Check the springs, adjuster, lever and aluminum anchor pin for signs of wear or damage and if something is broken, replace it.

OEM 2008 Dodge Charger Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

View related parts
2008 Dodge Charger Parking Brake Shoes, Rear Part Number: 68020626AB
$90.76 MSRP: $136.00
You Save: $45.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5137624AA, 68020626AA, 68020626AC, 5103204AA
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.1 x 6.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020626AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Charger Parking Brake Shoe Parts and Q&A

Q: How to Remove the Parking Brake Shoe on Each Side on 2008 Dodge Charger?
A: You should start by getting under the vehicle and raising it to remove the parking brake shoes on both sides. After that, open up the rear hub and take out its bearing. Completely free up the screws that adjust the parking brake shoe. Take out the shipping spring first, then the shoe adjuster. Remove the upper radiator brake shoe hold-down clip and pin and next, the upper brake shoe from the return spring and lever. Take the return spring off the bottom of the shoe and take out the shoe actuator lever from the end of the cable. After that, get rid of the hold-down clip and pin beneath the lower brake shoe. Check the springs, adjuster, lever and aluminum anchor pin for signs of wear or damage and if something is broken, replace it.