How to Install an ABS Control Module Correctly on 2008 Dodge Charger?

To install the Electronic Brake Control Module, clean the HCU and ABM surface. Replace old seals and O-rings without lubricating. Install the ABM on the HCU and screw it in place and position the ICU. Clip brake tubes and hook up ABM harness. Finally, reconnect the battery and do a Diagnostic Verification Test.

OEM 2008 Dodge Charger ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2008 Dodge Charger Control Module Part Number: 68028991AA
$502.66 MSRP: $737.00
You Save: $234.34 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module Anti-Lock Brake System
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.2 x 8.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028991AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Charger Modulator Valve Part Number: 68028990AA
Product Specifications
- Other Name: Control - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 4.70 Pounds
- Item Dimensions: 6.9 x 7.0 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028990AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Charger Control Module Part Number: 68028992AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module Anti-Lock Brake System
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.9 x 6.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68028992AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Charger ABS Control Module Parts and Q&A

Q: How to Install an ABS Control Module Correctly on 2008 Dodge Charger?
A: To install the Electronic Brake Control Module, clean the HCU and ABM surface. Replace old seals and O-rings without lubricating. Install the ABM on the HCU and screw it in place and position the ICU. Clip brake tubes and hook up ABM harness. Finally, reconnect the battery and do a Diagnostic Verification Test.