How to Locate and Remove the Intake Manifold Temperature Sensor on 2008 Dodge Durango?

The IMT sensor can be found in the air intake resonator close to the gasket around the throttle body. Take off the air intake resonator from the throttle body before you try to remove the sensor. Following that, remove the connector from the IMT sensor. First, wipe off any dirt where the resonator meets the sensor base, then lift the tiny release tab and twist the sensor 1/4 turn counter-clockwise to remove it. Always inspect the sensor O-ring at the end of the maintenance.

OEM 2008 Dodge Durango Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2008 Dodge Durango Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Locate and Remove the Intake Manifold Temperature Sensor on 2008 Dodge Durango?
A: The IMT sensor can be found in the air intake resonator close to the gasket around the throttle body. Take off the air intake resonator from the throttle body before you try to remove the sensor. Following that, remove the connector from the IMT sensor. First, wipe off any dirt where the resonator meets the sensor base, then lift the tiny release tab and twist the sensor 1/4 turn counter-clockwise to remove it. Always inspect the sensor O-ring at the end of the maintenance.