How to Remove the Intake Manifold Temperature Sensor on 2007 Dodge Durango?

Before removing the intake manifold temperature (IMT) sensor, take out the air intake resonator from the throttle body. After that, pull the wire connector off the IMT sensor. Wipe off the sensor's resonator to clear away any surface debris. The sensor can now be removed by lifting the plastic tab and rotating it about a quarter turn to the left. After that, inspect the O-ring on the sensor to ensure it is intact.

OEM 2007 Dodge Durango Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2007 Dodge Durango Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2007 Dodge Durango Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Remove the Intake Manifold Temperature Sensor on 2007 Dodge Durango?
A: Before removing the intake manifold temperature (IMT) sensor, take out the air intake resonator from the throttle body. After that, pull the wire connector off the IMT sensor. Wipe off the sensor's resonator to clear away any surface debris. The sensor can now be removed by lifting the plastic tab and rotating it about a quarter turn to the left. After that, inspect the O-ring on the sensor to ensure it is intact.