How to Service and Repair a Rocker Arm Assembly on 2008 Dodge Durango?

Make sure to remove the negative terminal from the battery when you work on or repair your rocker arm assembly, just in case anything goes wrong. Take off the cylinder head cover. To take out the rocker arm from cylinder No. 4, start the crankshaft until No. 1 cylinder is at BDC intake. Cylinder No. 1 should be turned to BDC combustion when you are on the crankshaft. Volumes 3 and 5 call for rotating the crankshaft so that cylinder No. 1 stops at the very top of its exhaust stroke. In order to use cylinders No. 2 and No. 6, rotate the crankshaft so the top of cylinder No. 1 aligns with the front of the No. 1 spark plug. Gently squeeze down the Remover/Installer 8516 lever on the valve spring to take out the rocker arm.

OEM 2008 Dodge Durango Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rocker Arms found

View related parts
2008 Dodge Durango Rocker Arms Part Number: 53020742AC
$33.86 MSRP: $44.05
You Save: $10.19 (24%)
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve
- Replaces: 68045794AA, 53021913AB, 53020742AB
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020742AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Dodge Durango Rocker Arms Part Number: 53021552AB
$152.96 MSRP: $227.00
You Save: $74.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Intake Rocker Arm; Rocker Arm Intake
- Replaces: 53021552AA, 68060343AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 1.6 x 6.2 x 23.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 53021552AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, GT, Limited, Limited Hybrid, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, ST, SXT, Special Service | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Durango Rocker Arms Part Number: 53021553AB
$151.61 MSRP: $227.00
You Save: $75.39 (34%)
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Exhaust Rocker Arms; Rocker Arm Exhaust
- Replaces: 53021553AA, 68060344AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 1.5 x 6.1 x 23.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021553AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, GT, Limited, Limited Hybrid, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, ST, SXT, Special Service | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Durango Rocker Arm Parts and Q&A

Q: How to Service and Repair a Rocker Arm Assembly on 2008 Dodge Durango?
A: Make sure to remove the negative terminal from the battery when you work on or repair your rocker arm assembly, just in case anything goes wrong. Take off the cylinder head cover. To take out the rocker arm from cylinder No. 4, start the crankshaft until No. 1 cylinder is at BDC intake. Cylinder No. 1 should be turned to BDC combustion when you are on the crankshaft. Volumes 3 and 5 call for rotating the crankshaft so that cylinder No. 1 stops at the very top of its exhaust stroke. In order to use cylinders No. 2 and No. 6, rotate the crankshaft so the top of cylinder No. 1 aligns with the front of the No. 1 spark plug. Gently squeeze down the Remover/Installer 8516 lever on the valve spring to take out the rocker arm.