How to Install a Front Sway Bar Link on 2008 Dodge Durango?

First, connect the sway bar link (7) to the vehicle during installation. Attach the retainers, grommets and upper nut to the sway bar (6) and tighten each of these to 54 Nm (40 ft. lbs.). After that, install the lower nut and tighten it to 125 ft. lbs. (169 Nm). Lastly, get rid of the support and lower the vehicle all the way to the ground.

OEM 2008 Dodge Durango Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2008 Dodge Durango Stabilizer Link, Front Part Number: 5135751AC
$69.06 MSRP: $102.00
You Save: $32.94 (33%)
Product Specifications
- Other Name: Link - Stabilizer Bar; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link Kit Stabilizer Bar; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Replaces: 5135751AA, 5135751AB
- Item Weight: 2.00 Pounds
- Item Dimensions: 10.8 x 4.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135751AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Stabilizer Link, Rear Part Number: 55398928AB
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link Kit Stabilizer Bar; Link Stabilizer Bar; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 52113285AA, 55398928AA
- Item Weight: 1.60 Pounds
- Item Dimensions: 5.5 x 4.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55398928AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Sway Bar Link Parts and Q&A

Q: How to Install a Front Sway Bar Link on 2008 Dodge Durango?
A: First, connect the sway bar link (7) to the vehicle during installation. Attach the retainers, grommets and upper nut to the sway bar (6) and tighten each of these to 54 Nm (40 ft. lbs.). After that, install the lower nut and tighten it to 125 ft. lbs. (169 Nm). Lastly, get rid of the support and lower the vehicle all the way to the ground.