How to Install a Power Steering Pump for a 2.7L/3.5L Engine on 2008 Dodge Magnum?

For the Power Steering Pump installation on the 2.7L/3.5L engine, put the pump in position over the opening in the engine bracket. Screw three bolts with washer through the access holes in the pulley and the engine bracket until the torque reads 28 Nm (21 ft. lbs.) Before putting in a pressure hose, always use a fresh O-ring and first lubricate it with fluid from the power steering container. Link the pressure hose to the pump and tighten the tube nut to 47 Nm (35 ft. lbs.) as well. Tie the end of the supply hose to the pump and fasten it in place with a clamp. After that, fasten the serpentine drive belt and then put in the air cleaner housing and the inlet tube. Then, hook the battery negative cable to the battery post so it connects well and bleed and fill the power steering system.

OEM 2008 Dodge Magnum Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Pumps found

View related parts
2008 Dodge Magnum Power Steering Pump Part Number: 4782524AF
$296.16 MSRP: $434.00
You Save: $137.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Replaces: 4782524AE, 4782524AC, 4782524AD
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.4 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782524AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Magnum Power Steering Pump Part Number: 5290845AB
$289.98 MSRP: $436.00
You Save: $146.02 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Replaces: 5290845AA
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.5 x 7.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290845AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- SRT8 | 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Power Steering Pump Part Number: 4782523AF
$381.48 MSRP: $536.00
You Save: $154.52 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Replaces: 4782523AD, 4782523AC, 4782523AE
- Item Weight: 3.20 Pounds
- Item Dimensions: 5.2 x 5.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782523AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- SE, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Dodge Magnum Power Steering Pump Parts and Q&A

Q: How to Install a Power Steering Pump for a 2.7L/3.5L Engine on 2008 Dodge Magnum?
A: For the Power Steering Pump installation on the 2.7L/3.5L engine, put the pump in position over the opening in the engine bracket. Screw three bolts with washer through the access holes in the pulley and the engine bracket until the torque reads 28 Nm (21 ft. lbs.) Before putting in a pressure hose, always use a fresh O-ring and first lubricate it with fluid from the power steering container. Link the pressure hose to the pump and tighten the tube nut to 47 Nm (35 ft. lbs.) as well. Tie the end of the supply hose to the pump and fasten it in place with a clamp. After that, fasten the serpentine drive belt and then put in the air cleaner housing and the inlet tube. Then, hook the battery negative cable to the battery post so it connects well and bleed and fill the power steering system.