OEM 2008 Dodge Nitro Cruise Control Switch

2008 Dodge Nitro Cruise Control Switch Parts and Q&A

• Q: How to Install the Cruise Control Switch on 2008 Dodge Nitro?

  A: You should begin by fitting the electrical connector to the speed control switch so you can install the cruise control switch. Following this, put the speed control switch in place using the mounting screws and tighten them only to 1.6 Nm (15 in lb.). Make sure that the rubber seal sits properly against the switch as you work. Install the horn switch and hold it in place with three fastening bolts. After that, attach the electrical connector to the Clock Spring and secure the driver air bag in place. Before you connect the battery's negative cable, always verify the air bag system with a related scanner. Once you are done with the test, connect the battery and shut the hood. At last, examine whether both the vehicle and the system are fully functional.