How Does a Parking Assist Distance Sensor Get Installed on 2008 Dodge Nitro?

Installation of parking assist distance sensors To install parking assist distance sensors, install O-ring spacer on sensor membrane, making sure it is oriented well. Connect the sensor to the bracket and it should fit in perfectly with the fascia. Make sure sensor is centered and do not pinch O-rings. Reconnect the wire harness and re-fit the bumper fascia.

OEM 2008 Dodge Nitro Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Assist Distance Sensor found

View related parts
2008 Dodge Nitro Reverse Sensor, Black, Rear Part Number: 1AF63TZZAA
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Rear; Ultrasonic Sensor; Parking Sensors; Sensor; Sensor Parking Assist; Parking Aid Sensor
- Position: Rear
- Replaces: 1AF63RXFAA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AF63TZZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Parking Assist Distance Sensor Parts and Q&A

Q: How Does a Parking Assist Distance Sensor Get Installed on 2008 Dodge Nitro?
A: Installation of parking assist distance sensors To install parking assist distance sensors, install O-ring spacer on sensor membrane, making sure it is oriented well. Connect the sensor to the bracket and it should fit in perfectly with the fascia. Make sure sensor is centered and do not pinch O-rings. Reconnect the wire harness and re-fit the bumper fascia.